2025 EXA SCRAP/DEMOLITION FRAMELESS END DUMP
Description
EXA Scrap/Demolition Frameless End Dump
**Tarp is optional, not included in price**
Capacity: 89 cu. yds.
Commodity: Transportation of scrap, construction debris
Dump angle: 45 degrees, all 8 tires stay on the ground
Overall Length: 42 ft.
Height: 12 ft 4 in, 105" side walls
Width: 102 in.
Weight: 22,800 lbs
Hydraulic Dump Hoist: 8", 5-stage inverted trunnion mount by Custom Hoists. Front-mounted outside of bulkhead.
Suspension: 50,000 lbs Hutch- Single Point Tandem with Oscillating Trunnion Bushing
Body: 5mm Hardox 450 Steel (175 Ksi, 450 Brinell Hardness)
Top Rail: 4" x 4" x 1/4" tube with angle
Gate: 3/16" Hardox 450 Steel (175 Ksi, 450 Brinell Hardness). Barn Door style with hinges on the curb side, air operated bottom latch and integrated mud flaps
Front: 3/16" Hardox 450 Steel (175 Ksi, 450 Brinell Hardness)
Bracing: 1/4" High strength steel internally stiffened
Axles: Two (2) 30,000 lbs. each axle with automatic slack adjusters and Stemco wheel ends.
Brakes: 16.5" x 7" brakes with 2S1M ABS
Landing Gear: One (1) pair of Holland 2-speed landing gear
Upper Coupler: Oscillating fifth wheel plate with Holland King Pin
Draft Arms: 5”x3”x1/4” Rectangular Tube
Tires: Eight (8) 11R x 24.5 16 Ply
Wheels: Eight (8) 8.25 x 24.5 Steel 10 Hole Hub Piloted
Access Ladder: Steel front and rear ladders
Coating: Two coats of polyurethane high-gloss on an epoxy primer (4-6 mils DFT)
Paint Prep: All steel surfaces shotblasted and pre chem wash
Conspicuity tape: 3M Per DOT
Fenders: Rear steel bolt-on
Full Dump Position: Without lifting the front wheels
Lights: Sealed harness and recessed Optronics GloLights LED per DOT and ICC
Mud Flaps Two (2) Anti-sail attached to rear gate
Paint Color: Available in a variety of different colors. Standard paint colors: White, Black, Gray
Option- Wheels: Aluminum
Option- Length: Custom capacity (ex. 40ft long; 100" sides, 87 cu yds)
Option-Side walls Height 84"-105" side walls (65-99 cu yds)
Option- Frame: Quarter frame
Option Tarp: Cramaro electric or manual options
Option- Fenders: Aluminum or steel front fendersSpecifications
Year2025
ManufacturerEXA
ConditionNew
Stock NumberSCRAP/DEMOLITION
Length12.8 m
Width259.08 cm
Height3.76 m
Frame TypeFrameless
SuspensionSpring
Tires24.5
WheelsAll Steel
Number of Rear AxlesTandem
Axle TypeFixed
Year2025|
ManufacturerEXA|
ConditionNew|
Stock NumberSCRAP/DEMOLITION|
Length12.8 m|
Width259.08 cm|
Height3.76 m|
Frame TypeFrameless|
SuspensionSpring|
Tires24.5|
WheelsAll Steel|
Number of Rear AxlesTandem|
Axle TypeFixed|
